How To Root Galaxy S9/S9+

how to root samsung galaxy s9

In this guide, I will show you how to root Samsung Galaxy S9 / S9 Plus on the latest Android 9.0 Pie firmware.

how to root-galaxy s9-s9+
how to root-galaxy s9-s9+

Step 1. Check Settings→About phone and check the model variety of your Galaxy S9 or S9 and, it ought to be one among the listed below:

Galaxy S9 – SM-G960F, SM-G960F/DS, Korean SM-G960N, Chinese Qualcomm SM-G9600

Galaxy S9 Plus – SM-G965F, SM-G965F/DS, Korean SM-G965N, SM-G9650 Qualcomm

NOTE: U.S. models or any Qualcomm models ending in, “U” can’t be unloving exploitation this technique because the boot loader is fast. My best suggestion is to sell it and obtain a global model that has unbarred the boot loader, any of the model numbers higher than can work.

NOTE 2: For Chinese Qualcomm models SM-G9600 or SM-G9650, you’ll be able to follow this tutorial gradual solely factor totally different is the version of TWRP recovery that isn’t provided during this tutorial(but easy Googling ought to assist you to realize it).


how to root-galaxy s9-s9+
how to root galaxy s9/s9+

Step 2. Faucet on “Software information” and check that you have Android version “9”. Then conjointly faucet on the “Build number” regarding five times till you’ve got enabled developer choices.

Step 3. Faucet the rear button TWICE and scroll to an all-time low of the menus, you must see a brand-new menu possibility referred to as “Developer options.” Faucet thereon.

Step 4. If it’s been a minimum of 7-days since you got your Galaxy S9 or S9 and, you ought to see AN choice for “OEM unlocking.” If you’ll flip it on while not wiping information, act and be intimate. It asks, you to try to do a works reset, certify to browse the directions below, and conjointly watch my video tutorial that explains piecemeal.

IMPORTANT: If your Galaxy S9 or S9 and desires to try to do a plant reset, able to make out, however, don’t LET IT REBOOT! Then you won’t be able to flash TWRP recovery and wait for 7-days MORE!

This simply happened to Pine Tree State on my new S9, therefore, I have even to attend 7-days once more. A way to fix it? Once your phone reboots once choosing plant reset, now HOLD DOWN Volume Down, Bixby, and Power buttons for concerning five seconds till you see a warning screen.

Again, if you miss this new crucial step phones that raise the user for plant reset, YOU WILL HAVE TO WAIT 7 MORE DAYS

Step 5. Hold down Volume Down, Bixby, and Power button along for regarding fifteen seconds till your phone resets into Odin warning mode as shown below.

Step 6. Hit the Volume Up button then connect a USB cable from your phone to a Windows computer. (Samsung Odin software system solely supports Windows therefore if you don’t have a Windows computer, simply go borrow your friends for a couple of hours).

Step 7. Download the necessary files :

Unzip the ODIN zip file into a folder and keep the reset of files in zip format.



Step 8. Run the Odin program(after unzipping). If you see a random COM range highlighted in the sky blue color like shown on top of, you have already got drivers put in. If not(most people), run the Samsung USB driver program you downloaded earlier, and it ought to install the drivers for you. Once put in, you ought to see it. If not, attempt unplugging/re-plugging your USB cable.

Next select, “AP” then select the TWRP img.tar file you downloaded for your Galaxy S9 or S9+. Before striking the begin button, scan below!!!

IMPORTANT: As before long as you hit begin, it solely takes five seconds for the Odin program to complete flashing TWRP recovery on your Galaxy S9 or S9 and.

As before long as your phone reboots(screen goes blank), you would like to carry DOWN VOLUME UP, BIXBY, AND POWER BUTTONS TOGETHER! If you damage this step, you’ll install STOCK FIRMWARE(unroot) AND ought to WAIT seven DAYS. If this can be your 1st time, please watch the video tutorial and master the buttons before attempting!!!

how to root-galaxy s9

how to root-galaxy s9


Step 9. If you have got with success flashed TWRP and rebooted into TWRP, you ought to see a screen like on top of, faucet on “Keep scan Only.”

Step 10. Grab some basis and pat yourself on the rear as you only finished the toughest a part of the foundation. This can be as a result, Samsung has enforced new security measures wherever if the phone reboots into the system, it won’t allow you to install TWRP recovery. We will bypass this just by not holding the phone bring up into the system rather into TWRP recovery like we tend to do in Step eight.

Next, we’ll wipe the device fully, therefore, faucet on “Wipe.”

Step 11. Opt for “Format Data” and kind, “yes” to wipe EVERYTHING on your Galaxy S9 or S9+. This can be needed to wipe the device and conjointly get obviate system encoding to root your Galaxy S9 or S9+ properly.

Step 12. IMPORTANT, return to the home menu, select, “Reboot” menu then select, “Recovery” to reboot TWRP. This is often terribly May IMPORTANTE as a result of once more if you resuscitate unremarkably, you may re-install stock code and wait seven days.

Keep Read Only
Keep Read Only

Step 13. Once rebooted into TWRP, select, “Keep Read Only” conjointly.

Step 14. Connect your Galaxy S9 or S9+ to your computer and duplicate over the OEM Issue Devices zip file to your phone.

Step 15. Use the Install menu to put in the OEM Issue ZIP file. For AROMA installer, select a computer memory installer and check that to ascertain on “Patch for OEM issue”!!! Once put in, reboot system(finally!).

let's go
let’s go

Step 16. You must see the welcome screen, sign in.

Step 17. If you don’t see the Magisk Manager app within the app drawer, transfer Magisk Manager APK on your phone and install it.

Step 18. If you see, “Magisk isn’t installed”, re-install OEM Issue Devices zip file by re-booting into TWRP. If you don’t acumen to try to do this, watch 11:25 of the video tutorial that shows you ways bit-by-bit. You see no errors like that skip to Step 19.

Step 19. If you see, “update available” don’t INSTALL THE UPDATE! Solely UPDATE Magisk Manager app(the one below it) because the Magisk used for development on Galaxy S9 or S9+ is totally different from official Magisk and it’s going to brick your phone! However, if you bought the current purpose, you’re totally rooted!

Step 20. Verify you have 100% full root by running any rooted apps such as Titanium Backup app on the Play Store and you should see a Superuser request window pop up like shown above.

Congratulations! You have fully rooted your Samsung Galaxy S9 or S9 Plus on the latest Android 9.0 Pie!



Leave a Reply

Your email address will not be published. Required fields are marked *